Cart 0

How To Mount a Button Maker - Button Making Questions, Ask ABM

Button Making Questions Ask ABM

One of the most common button making questions we are asked here at ABM is, "what size screws do I use to mount my button maker?"

To mount your button maker to a board, you need 2 flat head screws 1/4-20 x 1", 2 washers 1/4" and 2 nuts 1/4-20.

If you have a punch cutter you would also like to mount all you need is 2 socket head cap screws 1/4-20 x 1" (alloy steel) and 2 washers .78 x .254 x .016.

Of course you can always make it super easy and order the mounted kit from ABM which comes with everything you need to mount your new button making system!

Mounted Button Making Kit

You can find advice and answers to all your button making questions in our Facebook group, The Pinback Button Making Community.  Who knows?  You might even make a few new friends while you're there.  Until then, happy button making! 

The Pinback Button Making Community

 By Brighid Brown, Director of Blogging and All Things Cool at ABM 

Share this post

← Older Post Newer Post →

Leave a comment

Please note, comments must be approved before they are published.



Sold Out