Menu
Cart 0

1.75"x2.75" Rectangle Button Maker

  • $1,794.95

SKU: #1727
Machine only. Includes the press and a starter supply pack of button parts. To make buttons from day one you'll also need a cutter and pinback button sets, or get the 1.75"x2.75" Rectangle Professional Kit, the complete setup with free UPS Ground shipping.

The 1.75"x2.75" Rectangle Button Maker (Model 1727) is an all-steel press for making 1 3/4" x 2 3/4" rectangle pinback buttons and magnets, in horizontal or vertical layouts. It ships with 25 complete pinback button sets, a white silicone Stick Lubricant, and full instructions, and it is made in the USA with American steel.

A rectangle button gives you room for a name and a title, a photo with a caption, or a logo with a line of text. The Model 1727 uses a cam-on-roller design, so each press takes very little hand force and a finished button takes under five seconds. It is backed by a lifetime warranty against manufacturing defects and lifetime U.S.-based phone support. American Button Machines is family-owned and based in Plano, Texas since 2005.

1.75"x2.75" Rectangle Button Maker Specifications

Model Model 1727
Finished Button Size 1.75" x 2.75" rectangle (1 3/4" x 2 3/4"), horizontal or vertical
Graphic Cut Size 2.390" x 3.328". Your artwork is cut larger than the button so the edges wrap around the shell
What's Included The press, 25 complete pinback button sets, a white silicone Stick Lubricant, and complete instructions
Not Included A paper cutter and Build-A-Button design software. Both come with the 1.75"x2.75" Rectangle Professional Kit
Press Design Patented two-step press, cam-on-roller design, center-pivot metal dies with no compression rings to wear out or misalign
Construction All steel, no plastic or composite parts. Low center of gravity so it won't tip, with mounting holes in the base
Speed Under five seconds per button, several hundred buttons per hour
Power Required None, fully manual
Photo & Fabric The machine can be adjusted for photo paper or fabric. Contact us before ordering to arrange it
Warranty & Support Lifetime warranty against manufacturing defects, lifetime U.S.-based phone support
Shipping Ships at standard rates. Free UPS Ground shipping (lower 48 states) comes with the Rectangle Professional Kit
Purchase Orders Accepted. Download a quote right from your cart
Returns All sales final. No returns or exchanges on this item
Manufactured Made in the USA with American steel

Built to Last

  • All-steel construction. No plastic or composite parts, with a low center of gravity and mounting holes in the base.
  • Two-step press with a swivel die set. Press once, swivel, press again. No changing dies between steps.
  • Swivel die stop. Keeps the upper and lower dies aligned on every press.
  • Positive full-stroke verification. The handle has to complete its full travel, so half-made buttons never end up in your finished pile.
  • Cam-on-roller design. Very little hand force needed, and safe for school children to operate.
  • Cushioned hand grip.
  • "Zero scrap loss" engineering.

Open vs. Closed Corners

Two kinds of cutters make graphics for rectangle buttons. The 1.75"x2.75" Graphic Punch, the cutter in the Rectangle Professional Kit, leaves "open corners" on the back of the finished button. A 1.75"x2.75" cutting die used with the Die Cutting Press closes those corners. The 1.75"x2.75" die is not listed online, so call (972) 985-5074 to order one.

The difference between open and closed corners on rectangle pinback buttons

American Standard Sizing: Why It Matters

The Model 1727 and its supplies are built to American Standard 1.75" x 2.75" sizing. That is exactly 44.45 mm x 69.85 mm. Imported rectangle machines and parts are sold in rounded metric sizes, and the actual dimensions vary from seller to seller. On a crimp, a fraction of a millimeter matters, so American Standard parts do not typically work in foreign-made metric machines, and metric parts do not typically work in the Model 1727.

Not sure which machine you have? Call (972) 985-5074 and we'll help you identify it.

What You Can Make with a 1.75"x2.75" Rectangle Button Maker

The same Model 1727 and the same rectangle shells press every product below. Pick the back that fits the job.

1.75 x 2.75 inch horizontal rectangle pinback button set Horizontal Pinbacks

Wide-format buttons with the pin running across: shell, mylar, and pinback.

1.75 x 2.75 inch vertical rectangle pinback button set Vertical Pinbacks

Tall-format buttons for portraits and badges: shell, mylar, and pinback.

1.75 x 2.75 inch rectangle refrigerator magnet set Rectangle Magnets

Shell, plastic back, mylar, and a 0.060"-thick peel-and-stick magnet.

What You'll Need to Start

The Model 1727 makes the button. You also need a way to cut your graphics to 2.390" x 3.328" and more button parts once the 25 starter sets run out.

Frequently Asked Questions

What comes with the 1.75"x2.75" Rectangle Button Maker?

The Model 1727 press, a starter pack of 25 complete pinback button sets, a white silicone Stick Lubricant, and complete instructions on how to make buttons. A paper cutter and Build-A-Button design software are not included with the machine alone.

Can I make both horizontal and vertical buttons?

Yes. The same machine and the same Graphic Punch make both. The pinback set you choose decides which way the pin runs: horizontal sets for wide layouts, vertical sets for tall ones.

Should I buy the machine alone or the kit?

If you already own a 1.75"x2.75" cutter, the machine alone is all you need. If you are starting fresh, the Rectangle Professional Kit puts the machine, the 1.75"x2.75" Graphic Punch, 250 to 1,000 horizontal pinback sets, three months of Build-A-Button, and the Button Essentials design collection in one order with free UPS Ground shipping.

What is the difference between open and closed corners?

The Graphic Punch leaves open corners on the back of a finished rectangle button. A 1.75"x2.75" cutting die on the Die Cutting Press closes them. Call (972) 985-5074 to order the die.

Can I return the rectangle button maker?

No. All sales are final on this item, with no returns or exchanges. If you have questions about whether it fits your project, call (972) 985-5074 before ordering.

How do I take care of my button maker?

Oil the moving parts with 3-in-One oil and multi-purpose lithium grease every 1,000 to 5,000 buttons, or about every six months with light use. Clean the dies with a dry soft cloth and compressed air. Never use water, cleaners, or WD-40. The included Stick Lubricant keeps the crimp die running smoothly.

1.75 x 2.75 inch Rectangle Button Maker Made in the USA

We Also Recommend
1.75"x2.75" Rectangle Button Maker $1,794.95
Sale

Unavailable

Sold Out