What Customers Are Saying
The 1.5" Button Maker (Model 150) is an all-steel press for making professional 1.5 inch (1 1/2") pinback buttons, magnets, keychains, and more. It ships with 25 complete 1.5" pinback button sets and full instructions, and it is made in the USA with American steel.
The 1.5" size sits between the small 1.25" and the full-size 2.25": room for bolder artwork and larger lettering, while staying light on a lapel, lanyard, or backpack. A cam-on-roller design means each press takes very little hand force, and a finished button takes under five seconds. Every Model 150 is backed by a lifetime warranty against manufacturing defects and lifetime U.S.-based phone support. American Button Machines is family-owned and based in Plano, Texas since 2005.
1.5" Button Maker Specifications
| Model | Model 150 |
|---|---|
| Finished Button Size | 1.5" round (1 1/2") |
| Graphic Cut Size | 1.837" round. Your artwork is cut larger than the button so the edge wraps around the shell |
| What's Included | The press, 25 complete 1.5" pinback button sets (shell, mylar, prepinned pinback), and complete instructions |
| Not Included | A paper cutter and Build-A-Button design software. Both come with the 1.5" Button Maker Kit |
| Press Design | Patented two-step press, cam-on-roller design, center-pivot metal dies with no compression rings to wear out or misalign |
| Construction | All steel, no plastic or composite parts, yet lightweight. Low center of gravity so it won't tip, with mounting holes in the base |
| Speed | Under five seconds per button, several hundred buttons per hour |
| Power Required | None, fully manual |
| Photo & Fabric | The machine can be adjusted for photo paper or fabric. Contact us before ordering to arrange it |
| Warranty & Support | Lifetime warranty against manufacturing defects, lifetime U.S.-based phone support. Ultimate Extended Warranty available |
| Shipping | Ships at standard rates. Free UPS Ground shipping (lower 48 states) comes with the 1.5" Button Maker Kit |
| Purchase Orders | Accepted. Download a quote right from your cart |
| Manufactured | Made in the USA with American steel |
Built to Last
- All-steel construction. No plastic or composite parts, yet lightweight. Low center of gravity, with mounting holes in the base.
- Two-step press with a swivel die set. Press once, swivel, press again. No changing dies between steps.
- Swivel die stop. Keeps the upper and lower dies aligned on every press.
- Positive full-stroke verification. The handle has to complete its full travel, so half-made buttons never end up in your finished pile.
- Cam-on-roller design. Very little hand force needed, and safe for school children to operate.
- Cushioned hand grip.
- "Zero scrap loss" engineering.
- American Standard 1.5" sizing. Built to run ABM's 1.5" supplies, all made in the USA.
American Standard Sizing: Why It Matters
The Model 150 and its supplies are built to American Standard 1.5" sizing. A 1.5" button measures exactly 38.1 mm. Imported machines and parts are usually sold as "38mm," a rounded metric size, and the actual dimensions vary from seller to seller. On a crimp, a fraction of a millimeter matters, so American Standard parts do not typically work in foreign-made 38mm machines, and 38mm parts do not typically work in the Model 150.
Not sure which machine you have? Call (972) 985-5074 and we'll help you identify it.
What You'll Need to Start
The Model 150 makes the button. You also need a way to cut your graphics to a 1.837" circle and more button parts once the 25 starter sets run out.
What Else Can You Make with a 1.5" Button Maker
Pinback buttons are just the start. The same Model 150 and the same 1.5" front shells press every product below. Swap the back, and you have a new product line.
Ponytail Holders
Hair accessories for teams and dance groups. For use with Models 150 and Z-150F only.
Versa-Back Sample Pack
Several Versa-Back styles in one pack, to test new product lines before buying in bulk.
Frequently Asked Questions
What comes with the 1.5" Button Maker?
The Model 150 press, a starter pack of 25 complete 1.5" pinback button sets, and complete instructions on how to make buttons. A paper cutter and Build-A-Button design software are not included with the machine alone.
What else do I need to start making buttons?
A cutter that cuts your printed graphics to a 1.837" circle, and more pinback button sets once the starter pack runs out. ABM offers three 1.5" cutters: the 1.5" Graphic Punch, the Adjustable Circle Cutter, and the 1.5" Dynamo Hand-Held Punch Cutter. Regular printer paper works for graphics.
Should I buy the machine alone or the kit?
If you already own a 1.5" cutter, the machine alone is all you need. If you are starting fresh, the 1.5" Button Maker Kit puts the machine, your choice of cutter, 250 to 1,000 pinback sets, three months of Build-A-Button, and the Button Essentials design collection in one order with free UPS Ground shipping. The machine alone ships at standard rates.
Is a 1.5" button the same as a 38mm button?
No. A 1.5" button is exactly 38.1 mm. Imported "38mm" machines and parts are rounded metric sizes that vary from seller to seller, so they do not typically crimp correctly with American Standard parts or machines. Call (972) 985-5074 if you need help identifying your machine.
Can the 1.5" Button Maker make photo or fabric buttons?
Yes, with an adjustment. Photo paper and fabric are thicker than printer paper, so the machine needs an adjustment for the material. Contact us before ordering to arrange it. For fabric buttons, send us samples of the fabric you plan to use.
How do I take care of my button maker?
Oil the moving parts with 3-in-One oil and multi-purpose lithium grease every 1,000 to 5,000 buttons, or about every six months with light use. Clean the dies with a dry soft cloth and compressed air. Never use water, cleaners, or WD-40. ABM's Stick Lubricant keeps the crimp die running smoothly.
We Also Recommend

